Informationen über Modules

Website Firma Webseite Produkt
Modules Intego GmbH
Modules In the manufacturing of crystalline solar modules, single solar cells are soldered to strings and then laminated to high value modules. After the irreversible lamination process it is not possible to correct faults, so only perfect layups/matrices should be ppocessed. Our two VELA inspection systems offer a fully automated solution prior to and after the lamination process step. The inspection system can be delivered with a complete internal transfer system or as an in-build system to an existing automation. Both systems can handle layups/matrices and laminates with sizes up to 1.4 × 2.0 m2 within the typical production cycle times. The front and back side is inspected simultaneously., Measurement of distances between cells and to the frame, Measurement of string alignment and orientation, Detection of cracks, holes or chippings on the cells, Recognition of misaligned ribbons, Detection of impurities resp. inclusions (especially conducting contaminations which can cause shunts) between and on cells, Control of colour homogeneity, Reading of labels, e.g. barcodes

Verwandte Produkte:

Solving Luftkissen Modulsystem LKS

Solving Luftkissen Modulsystem LKS

Webseite Produkt
Firma:

LKS AG

Website Firma

Temperatur Input Modules

Temperatur Input Modules

Webseite Produkt
E-Mail senden
Anfrageformular
, • 8 Kanäle für alle gängigen Widerstandsthermometer (wie z.B. PT 100, Ni 100) sowie für Widerstandsferngeber bis 10 kΩ, • Anschlusstechnik 2-, 3-, oder 4-Leiter, • Eingänge eigensicher Ex ia IIC, • Galvanische Trennung...
Firma:

Hesta-Graham GmbH & Co. KG

Website Firma

ETL-Linie-4KN_20mmin-modul-45

ETL-Linie-4KN_20mmin-modul-45

Webseite Produkt
Unsere modul –Reihe deckt nicht nur Ihre Anforderungen an die technische Profilextrusion ab, sie übertrifft diese sogar. Modularität und Standardisierung - in Symbiose -bieten ein Spektrum welches keine Wünsche offen...
Firma:

extrunet GmbH

Website Firma
  • prozess

    Webseite Produkt
    Für extrunet ist das Erstellen von Projekten nicht nur ein reiner Gestaltungs- und Realisierungsprozess.Vielmehr sehen wir die Entwicklung von Extrusionsprojekten als Differenzierung von Unternehmen und Produkten am stark frequentierten...
     
  • PRODUKTE modul –Reihe

    Webseite Produkt
     
  • ETL-Linie-8KN_15mmin-modul-45

    Webseite Produkt
    Unsere modul –Reihe deckt nicht nur Ihre Anforderungen an die technische Profilextrusion ab, sie übertrifft diese sogar. Modularität und Standardisierung - in Symbiose -bieten ein Spektrum welches keine Wünsche offen...
     
  • KONZEPT

    Webseite Produkt
    Ein gutes Produkt schafft Begehren bei den Anwendern und beeinflusst nachhaltig den Verkaufserfolg.Diese grundlegende Regel wird bei extrunet für alle Entwicklungen strategisch angewandt. Nach einer umfassenden Analyse des Status Quo...
     
  • LINIEN modul –Reihe

    Webseite Produkt
     
  • NACHFOLGEN

    Webseite Produkt
    bestehend aus:- Kalibriertisch mit C-Schienen Wasserwanne- Bandabzug-/Säge Kombination- Kipptisch mit Verpackungsebene- SPS Steuerungüber 6 Zoll Touchscreen- Bediensprachen in Deutsch, Englisch, Russisch, Italienisch, Spanisch,...
     

EDL-Nachfolge-4KN_20mmin-modul-D

EDL-Nachfolge-4KN_20mmin-modul-D

Webseite Produkt
Firma:

extrunet GmbH

Website Firma

LINIEN modul –Reihe

LINIEN modul –Reihe

Webseite Produkt
Firma:

extrunet GmbH

Website Firma

Pneumatikmodule

Pneumatikmodule

Webseite Produkt
• IEF Werner bietet mit ihrem Modulkonzept die perfekte Lösung für alle Automationsaufgaben im Pneumatikbereich. Greifmodule von 5 bis 280 N Greifkraft können frei mit Schiebe- und Hubmodulen von 30mm bis 6m Hublänge und...
Firma:

IEF Werner GmbH

Website Firma

Tastatur Komponenten Module

Tastatur Komponenten Module

Webseite Produkt
Firma:

N&H Technology GmbH

Website Firma

Module €“ die Individuellen

Module €“ die Individuellen

Webseite Produkt
• Mit den entsprechenden Modulen machen Sie Ihre topex-Arbeitsstation zum unübertroffenen Spezialisten in Sachen Folien-, Kabel- oder Schilderhandling. Alle drei Module sind speziell für die Serie 5000 ausgelegt und deshalb schnell...
Firma:

topex GmbH

Website Firma

Cyclermodule

Cyclermodule

Webseite Produkt
E-Mail senden
Anfrageformular
Die hochwertige 70er Peltiermodulserie des Herstellers Ferrotec gelten als Lösung für Applikationen im thermisch-zyklischem Betrieb. Die Module wurden speziell für Applikationen mit extrem hohen Anforderungen an die Dynamik und den...
Firma:

uwe electronic GmbH

Website Firma

ETL-Linie-8KN_15mmin-modul-60

ETL-Linie-8KN_15mmin-modul-60

Webseite Produkt
Firma:

extrunet GmbH

Website Firma
schließen