Informationen über Dyno Testsockel
|
The New Standard in Testing Lead Free Devices With the patent pending Dyno Test Socket, you can get an innovative way to test lead free QFNs and other peripheral devices on 0.5mm and above. These test sockets provide consistent low and stable resistance with minimal cleaning and a mechanical cycle life of greater than 500,000 – which results in higher first past yields and a lower cost of test. The Endura Advantage The Dyno contact is a shaped metal, beryllium copper contact with Synergetix's Endura plating. This proprietary plating provides a contact surface that is more resistant to debris build up in lead free device testing. Designed for Effiency Because the design of the Dyno contact uses geometry that allows it to be self-cleaning, it requires only infrequent cleanings that take minimal effort. To assist with overcoming thecontaminants and oxides that can build up, the contact performs a slight wiping or scrubbing action on the device leads. Designed to utilize existing load boards for test sockets that have an offset between the device and load board contact points, the Dyno contact involves only minimal board side wiping so you get a longer board life. With the patent pending Dyno Test Socket, you can get an innovative way to test lead free QFNs and other peripheral devices on 0.5mm and above. These test sockets provide consistent low and stable resistance with minimal cleaning and a mechanical cycle life of greater than 500,000 – which results in higher first past yields and a lower cost of test.
|